The Stainless Steel ColdStream Air Gun provides a cold airflow commonly used for spot cooling.
At the heart of the ColdStream Gun is the Vortex Tube which is encased in a hot and cold end silencer. Cold air produced by the Vortex is directed to specific area through knuckle trucking. Hot air is then vented through two holes located in the silencer.
The cold air temperature can be as low as 50°C below the inlet air temperature and be maintained to +/- 0.6°C.
Coldstream Guns have no moving parts and so are intrinsically safe. They require virtually no maintenance which makes them ideal for harsh environments.
All Coldstream Guns are set to deliver the most efficient cooling possible. Coldstream Guns are factory set to 70% cold fraction at 80psi (5.4 Bar). As standard they are fitted with a Red 15 cfm Generator, so approximaty 10cfm of cold air will exit through the cold end of the Coldstream Gun.
The Coldstream Gun is supplied with a set of 4 high fraction Generators as standard.
Yellow 10cfm (283 l/min)
Red 15cfm (425 l/min)
Blue 25cfm (708 l/min)
Brown 35cfm (991 l/min)
No moving parts Low maintenance and easy to use
Stainless steel Suitable for harsh environments
Adjustment knob (adjustable models
only) Accurate temperature control
28cm knuckle trunking Easy direction of cold airflow
Magnetic base Quick and easy mounting to any metallic surface and can be moved
with little hassle.
A60015A – Adjustable Large Coldstream Gun, one outlet hose
A60015AY – Adjustable Large Coldstream Gun, two outlet hose
No moving parts – Low maintenance and easy to use
Stainless steel – Suitable for harsh environments
Adjustment knob (adjustable models only) – Accurate temperature control
28cm knuckle trunking – Easy direction of cold airflow
Magnetic base – Quick and easy mounting to any metallic surface and can be moved with little hassel.
Adjustable Large – (L)280mm x (H) 44.5mm