Tape Superfinisher attachments offer a fast and effective means to perform superfinishing on a standard engine lathe or turning machine. The units can be attached to the Toll Post of carriage with a very simple hook up, or be permanently mounted.
Superfinishing Vs Stone Grinding
In grinding with bonded wheels, microscopic pieces of the stone break loose and are forced between the roller and the wheel causing chatter marks and tearing of the surface. Tape Superfinishers use Microfilm Tapes which can avoid any of the issues associated with a wheel.
This process is ideal for Rubber Rollers used in critical high tolerance environments such as; Printing, Foil Rolling, Feed Rolls and Packaging applications. On certain materials a consistent reproducible finish of 0.004 microns can be achieved.
SF104
These are versatile retro-fit machines that can be used to apply a finished surface to a number of materials, including Rubber, Copper, Chrome, Aluminium, Stainless Steel, Plastic, Brass, Ceramics and Tungsten Carbide. Microfinishing or Lapping Film are used to polish the surface. These are available in Grits upto 50,000 on the traditional grit scale.
Superfinisher Type SF 104-Druck for finest finishing of cylindrical workpieces
• for the operation with lapping and microfinishing films up to 100 mm film width
• can be mounted in the steel holder of the lathe
• Pressure of contact roll pneumatically and precisely adjustable
• Cross oscillation infinitely variable from 0 – 2.500 strokes per minute
• stroke of oscillation 3 mm standard
• automatic self-centering of the film
• air pressure 6 bar, pressure max. 20 kp
• film advance variable from 1 – 26 cm/min.
• maximum main voltage 230 Volt
Accessories:
1 contact roll, complete with axle and bearing hardness can be chosen: 60, 80 or 95° Shore
Device completely ready for use, including electrical equipment, without coolant device
Price: € 13.710,00
Options:
a) Attachment arm with two contact rolls for double working surface
b) Attachment arm with contct belt for larger belt contact arc
c) Attachment arm, elongated
c) can also be deliverd with every belt width smaler than 100 mm
Demonstration and tests are possible, if desired.
Dimensions: length ca. 600 mm, height ca. 380 mm, width ca. 250 mm, weight ca. 25 kg
ADVANTAGES
- Easy Installation
- Easy to operate, with no special training necessary
- Rapidly achieves high lustre
- Quick change fixture for belt contact roll or belt
- Faster Finish with an oscillating abrasive system
- Constant accuracy on finish
- Constant surface finish
- Essential Maintenance free operation
- Rapid Belt change reduces downtime
- No dust emission
- Low noise emission
- Can be placed in double series for Pre & Fine Finish
- Boosts productivity & profits
TECHNICAL DATA and other models are available – Contact Us
SF106
These are versatile retro-fit machines that can be used to apply a finished surface to a number of materials, including Rubber, Copper, Chrome, Aluminium, Stainless Steel, Plastic, Brass, Ceramics and Tungsten Carbide. Microfinishing or Lapping Film are used to polish the surface. These are available in Grits upto 50,000 on the traditional grit scale.
Superfinisher Type SF 106 NG for finest finishing of cylindrical workpieces
• Device built for the operation with lapping and micro finishing films up to 50 mm belt width
• can be mounted on a lathe
• Pressure of contact roll pneumatically and precisely adjustable
• Cross oscillation infinitely variable from 0 – 3,000 strokes per minute
• Stroke of oscillation 3 mm standard
• Manually centering of the film
• Film advance variable from 1 – 26 cm/min.
• Main voltage 230 Volt
• Air pressure 6 bar
• Pressure max. 25 kp
Accessories: 1 contact roll complete with axle and bearing hardness can be chosen: 40, 60, 80 and 95° Shore
Device completely ready for use, including electrical equipment, with fixture for steel holder, without coolant device
Price: € 8.750,00
Approx. dimensions: length 480 mm, width 200 mm, height 270 mm, weight 20 kg
ADVANTAGES
- Easy Installation
- Easy to operate, with no special training necessary
- Rapidly achieves high lustre
- Quick change fixture for belt contact roll or belt
- Faster Finish with an oscillating abrasive system
- Constant accuracy on finish
- Constant surface finish
- Essential Maintenance free operation
- Rapid Belt change reduces downtime
- No dust emission
- Low noise emission
- Can be placed in double series for Pre & Fine Finish
- Boosts productivity & profits
TECHNICAL DATA and other models are available – Contact Us
SF102
These are versatile retro-fit machines that can be used to apply a finished surface to a number of materials, including Rubber, Copper, Chrome, Aluminium, Stainless Steel, Plastic, Brass, Ceramics and Tungsten Carbide. Microfinishing or Lapping Film are used to polish the surface. These are available in Grits up to 50,000 on the traditional grit scale.
Superfinisher Type SF 102
For finest finishing of cylindrical products
• Device designed to use micro-finishing- and lapping film rolls
• Max. film roll width: 100 mm
• Extremely compact
• Contact roll pressure precisely operated by pneumatic control
• Infinitely adjustable oscillation variable from 0 – 2,000 strokes per minute
• Oscilating stroke length 5 mm standard
• Automatic centering of film on contact roll
• Film feed infinitely adjustable from 1 – 26 cm/min
• Mains voltage 230 Volt / 10 A, 50 Hz +E
• Cooling fluid: emulsion, ca. 5 % fine filtered
• Air pressure: constantly 6 bar
• contact pressure up to 160 kp with 6 bar
Distance between centre and film contact roll to bed mounting plate approx. 80 mm
Machine complete, ready for use, incl. all electrical switch gear, without coolant system
Can be extended to a double station superfinisher!
Price: € 24.740,0
Approx. dimensions: Length 800 mm, width 300 mm, height 330 mm, weight 50 kg
Finishing Heads for Superfinisher Type SF 102
ADVANTAGES
- Easy Installation
- Easy to operate, with no special training necessary
- Rapidly achieves high lustre
- Quick change fixture for belt contact roll or belt
- Faster Finish with an oscillating abrasive system
- Constant accuracy on finish
- Constant surface finish
- Essential Maintenance free operation
- Rapid Belt change reduces downtime
- No dust emission
- Low noise emission
- Can be placed in double series for Pre & Fine Finish
- Boosts productivity & profits